Resto Finish Epoxy kit Black 7L (011-0679)

Description

RestoFinish Epoxycoat primer is an essential part of any car restoration, it’s a non-porous, high-bonding sealer that can be applied over bare clean metal and mixed surfaces. Epoxy seals oxygen from the metal preventing corrosion forming.

High quality 2 part Epoxies include zinc phosphate which increases the corrosion inhibiting properties even further. Ideally used where metal has recently been exposed or project vehicles will be unpainted for a duration of time.

RestoFinish Epoxycoat is a two component epoxy primer suitable for use over prepared steel surfaces. Epoxycoat is a non-toxic anti-corrosive zinc phosphate coating. It is ideal in situations where resistance to chemical, solvents and aggressive environmental conditions are required.

When used as a high build 4:1 (4 parts A to 1 part B) the film build is 75 microns per coat, with a suggested 2 coat application. This high build application is thicker than typical “high build” primers, it allows sanding and filling of small imperfections and pitting ready for additional coatings.

Where less build is required Epoxycoat can be reduced with RestoFinish Epoxycoat Reducer.

Direct to Metal
Over existing coating
Sealer
High Building
Anti-Corrosive
Zinc-Phosphate
Easy to sand
Solvent resistant.

Includes:
4 Litres of Grey Epoxycoat Part A SDS

1 Litre of Epoxycoat Hardener Part B SDS

2 Litre of Epoxycoat Reducer