Spies Hecker Plastic Primer (3304)
Priomat Elastic Primer Surfacer 3304 is a translucent universal 1K adhesion promoter for all commonly-found external plastic vehicle parts.
- Achieves reliable adhesion.
- Provides high elasticity.
- Enables easy application.
A universal, one component adhesion promoter for all normal plastic vehicle parts.
The products referenced herein may not be available for sale in your market. Please
consult your distributor for product availability.
Priomat® Elastic Primer 3304 Transparent
Approximately 12 seconds at 68°F/20°C, DIN 4
Unlimited (in a sealed container)
1. Do not allow Permahyd® Plastic Cleaning Paste 7081 to dry on the surface of the plastic
2. Thoroughly clean and scuff all surfaces of the plastic part, paying special attention to all
3. For hard to reach areas of the plastic part, use the application brush that is included
with the Permahyd® Plastic Cleaning Paste 7081.
4. Permahyd® Plastic Cleaning Paste 7081 is designed for raw plastic and is not suitable
for cleaning painted surfaces.
5. Always use a clean scuff pad.
6. Soft plastic may require a finer scuff pad.
7. Difficult to clean plastics may need to be cleaned more times, or if applicable the plastic
may be baked for a minimum of 15 minutes at 140°F (60°C). Some OEM plastic
bumpers do not recommend a bake cycle. Once the plastic has cooled, repeat the
procedure below for preparing raw plastics beginning with step 2.
All raw plastic parts commonly found on vehicle exteriors (Examples: PP, PP/EPDM, ABS,
SAN, PC, PA, PUR-RIM, R-TPU, TPO, PBTP, UP-GF).
Not recommended for pre painted substrate