Spies Hecker Plastic Primer (3304)
$103.06
Description
Priomat Elastic Primer Surfacer 3304 is a translucent universal 1K adhesion promoter for all commonly-found external plastic vehicle parts.
Product Features
- Achieves reliable adhesion.
- Provides high elasticity.
- Enables easy application.
GENERAL DESCRIPTION
A universal, one component adhesion promoter for all normal plastic vehicle parts.
The products referenced herein may not be available for sale in your market. Please
consult your distributor for product availability.
MIXING
COMPONENTS
Priomat® Elastic Primer 3304 Transparent
MIX RATIO
Ready-to-spray
APPLICATION VISCOSITY
Approximately 12 seconds at 68°F/20°C, DIN 4
POT LIFE
Unlimited (in a sealed container)
SPECIAL TIPS
1. Do not allow Permahyd® Plastic Cleaning Paste 7081 to dry on the surface of the plastic
substrate.
2. Thoroughly clean and scuff all surfaces of the plastic part, paying special attention to all
edges.
3. For hard to reach areas of the plastic part, use the application brush that is included
with the Permahyd® Plastic Cleaning Paste 7081.
4. Permahyd® Plastic Cleaning Paste 7081 is designed for raw plastic and is not suitable
for cleaning painted surfaces.
5. Always use a clean scuff pad.
6. Soft plastic may require a finer scuff pad.
7. Difficult to clean plastics may need to be cleaned more times, or if applicable the plastic
may be baked for a minimum of 15 minutes at 140°F (60°C). Some OEM plastic
bumpers do not recommend a bake cycle. Once the plastic has cooled, repeat the
procedure below for preparing raw plastics beginning with step 2.
APPLICATION
SUBSTRATES
All raw plastic parts commonly found on vehicle exteriors (Examples: PP, PP/EPDM, ABS,
SAN, PC, PA, PUR-RIM, R-TPU, TPO, PBTP, UP-GF).
Not recommended for pre painted substrate
Additional information
| Weight | 1 kg |
|---|
Be the first to review “Spies Hecker Plastic Primer (3304)”
Reviews
There are no reviews yet.